Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » How to Setting Winroute on my LAN
  •  
hb2305

Messages: 1
Karma: 0
Send a private message to this user
I have some PC (20 clients with IP : 192.168.1.6 - 192.168.1.x, SM:255.255.255.0), 1 router/ADSL modem (IP : 192.168.1.1) & 1 PC for winroute ( 2 ethernet-> 1 card : IP 192.168.1.4, one other : 192.168.1.5) ). my problem is setting above the all computer for share to internet. I'm try but can't run.
Please, help me. how i can do.
Sorry, my english is't very good.

regards
  •  
90177ro

Messages: 1

Karma: 0
Send a private message to this user
hb2305 wrote on Fri, 05 October 2007 06:57

I have some PC (20 clients with IP : 192.168.1.6 - 192.168.1.x, SM:255.255.255.0), 1 router/ADSL modem (IP : 192.168.1.1) & 1 PC for winroute ( 2 ethernet-> 1 card : IP 192.168.1.4, one other : 192.168.1.5) ). my problem is setting above the all computer for share to internet. I'm try but can't run.
Please, help me. how i can do.
Sorry, my english is't very good.

regards

Same problem here. Have ADSL Internet connection, 1 router/ADSL modem (can be set to bridging mode), 1 PC with winroute instaled, with 2 ethernet cards, 1 8 port switch. How I set them to work with Kerio ?. In this moment, my router/ADSl modem work in routing mode with IP set to 192.168.0.1. The other computers have
IP: 192.168.0.2 -> 192.168.0.x
SM: 255.255.255.0
GW: 192.168.0.1
DNS: given by the ISP
I undestand that I have to set my modem in bridge mode, set my ethernet card
IP: 192.168.0.1
SM: 255.255.255.0
GW: -
I need to enable and set the other Ethernet card too ?...
Please help me with this.
Sorry for my bad english

Regards,
Marius
Previous Topic: Messenger logging
Next Topic: DigiChat not working
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Sat Nov 18 16:33:16 CET 2017

Total time taken to generate the page: 0.00434 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.