Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Multiple WAN IP into single network card - config help (Multiple WAN IP into single network card - config help)
  •  
Krammer002

Messages: 3
Karma: 0
Send a private message to this user
I need to perform the following configuration within Kerio Winroute Firewall 6.4.2 to achieve the following result:

Winroute firewall box :
1 WAN interface (IP aaa.bbb.ccc.50 /28)
1 LAN interface (IP 192.168.10.1 /24)
All working OK.

Have the following additional IPs available:
aaa.bbb.ccc.51, aaa.bbb.ccc.52, aaa.bbb.ccc.53, aaa.bbb.ccc.54 and would like to be able to route them individually to specific IP address hosts on the LAN side (specific services, ports etc) e.g.

aaa.bbb.ccc.50 > Firewall host, Kerio VPN, etc.

aaa.bbb.ccc.51 > 192.168.10.50 (ports, service as required)

aaa.bbb.ccc.52 > 192.168.10.56 (ports, service as required)

aaa.bbb.ccc.53 > 192.168.10.60 (ports, service as required)

aaa.bbb.ccc.54 > 192.168.10.70 (ports, service as required)

I have added all the aaa.bbb.ccc.51 /28 IP addresses to the TCP/IP setting into the WAN network interface card Windows advanced settings and able to ping all aaa.bbb.ccc.50 /28 members.

I need assistance with the traffic rules as I am unable access services via a specific IP address source to the Firewall host destination e.g. KFW Admin, but works OK when using WAN interface to the Firewall host destination for the same service.

Please help...
  •  
Krammer002

Messages: 3
Karma: 0
Send a private message to this user
Update... Spotted my error and all seems now to work...
  •  
RHarmsen.nl

Messages: 189

Karma: 0
Send a private message to this user
Krammer002 wrote on Wed, 09 July 2008 19:48

Update... Spotted my error and all seems now to work...


Could you please explain the error you made, in order to help out others with this similiar problem?
Previous Topic: kerio winroute beta 6.5
Next Topic: Need technical support for create 100-120 vpn tunnels for terminal connections.
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Wed Oct 18 15:02:54 CEST 2017

Total time taken to generate the page: 0.00423 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.