Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Problem with 1 network card have 2 ip....
  •  
ArDark

Messages: 2
Karma: 0
Send a private message to this user
Hello all.

I have trouble.

On my server i'v used 2 network card's - one for External network and one internal.

On the 1-st NIC(external)i have two ip adresses bound them.
By default KWF has assigned only first IP adress bound to NIC.
And ignore other ones.

Q: How i may configure this NIC - that it's all IP adresses been available.

and

Q2: It is possible to solve my problem without install 3-rd NIC on my server and bound them 3rd Ip adress?

PS: sorry for pure english. It's not my best. :\
PPS: Thanks for support.

--------------------------------------------------------
win2003 - server, kwf 5.1.10, 1-st nic 3Com905b-tx and 2-nd Intel Pro 100.
  •  
sidbarker

Messages: 63
Karma: 0
Send a private message to this user
We have a similar situation at work - 4 public IPs on one card, and internal IP on second card. All works perfectly for us.
  •  
hypergrafx

Messages: 5
Karma: 1
Send a private message to this user
Hey,

As we plan to do the same thing within the next weeks,
I asked the support if this works, just a week ago.

They say it should work without any problems.

As already reported from someone else here Smile.

I would suggest doing the following:
- uninstall and delete kerio
- reasign all IPs
- reinstall kerio (latest version)

otherwise you could try doing that per hand Razz
- check InterfaceSetting
- readd NAT
- go to routing table and add routes

Don't know if that helps, but it should be worth a try Cool

Good Luck
Antonio
  •  
hypergrafx

Messages: 5
Karma: 1
Send a private message to this user
I think this document helps,

http://www.kerio.com/manual/kwf/en/ch05s03.html

go to multihomed and you will find a solution Smile
  •  
ArDark

Messages: 2
Karma: 0
Send a private message to this user
Thanks for all. I'll try.

Little assumption: if one of IP - External(Internet) and other Private network(but not my) all user within private network can be enter the server?

source: any
destination: 194.135.129.2 (http and ftp)(on NIC 1)
translation: none

and other rules:

source: any
destination: 10.107.8.32 (game server)(on NIC 1)
translation: none

can it work? or only one IP range allowed.
And what needed if first IP(194.135.129.2) have one gate (194.135.129.223).... and second IP(10.107.8.32) have other gate (10.107.8.254). Anyone have some situation?

Previous Topic: KWF 5.1.10: slow HTTP protocol inspector
Next Topic: No Dial-UP interface (RAS) on WinServer 2003 Web Edition
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Wed Nov 22 08:40:09 CET 2017

Total time taken to generate the page: 0.00379 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.