Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » NAT for VPN clients
  •  
Konan777

Messages: 1
Karma: 0
Send a private message to this user
Hello!

I has have a problem with routing packet via NAT to internet.
My VPN server has 192.168.255.0 mask 255.255.255.0
My client get 192.168.255.3 IP.
I made some route table change on client PC:
1 - route packets for (internet) 194.87.0.50 to 192.168.255.1
1 - route packets for (lan) 172.28.130.11 to 192.168.255.1

where 192.168.255.1 is VPN server.

1 194.87.0.50 255.255.255.255 192.168.255.1 1
2 172.28.130.11 255.255.255.255 192.168.255.1 1

ping to 172.28.130.11 pass through NAT
but ping to 194.87.0.50 not pass.
pathping to 194.87.0.50 stops after 192.168.255.3.

traffic policy attached

How to correct setup NAT for internet?

  • Attachment: TP01.jpg
    (Size: 67.18KB, Downloaded 923 times)

[Updated on: Mon, 01 June 2009 06:19]

Previous Topic: Certify Company Firewall
Next Topic: Two way Separate Networks
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Tue Sep 26 23:41:55 CEST 2017

Total time taken to generate the page: 0.00342 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.