Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » Call Routing
  •  
elied

Messages: 16
Karma: 0
Send a private message to this user
I use VMWare as my VM manager.
I have two Kerio operiotor VMs.
On Operator1 i setup a user named user1 ext=10.
On Operator1 i setup a user named user2 ext=11.
I use the 3cx phone as the soft phone.
I setup call routing on Operator1 (link to another pbx and i specified its IP address and a prefix for routing).
Now i want user1 to call user2.
On the soft phone i dialed 211 and the soft phone answered me with a "forbidden" message.
Is there anything wrong? PLease explain.
Another problem is i cannot integrate Operator with Connect.
Please see the attached screen shot.


  •  
ICT and Me

Messages: 940

Karma: 53
Send a private message to this user
Integration with Connect is only possible from Connect version 7.2.x (the Beta at this moment).

To be clear:
Two Operators running?
Do you make routing to both Operators?

ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
  •  
elied

Messages: 16
Karma: 0
Send a private message to this user
Yes
there are two operators running on two VMs
  •  
elied

Messages: 16
Karma: 0
Send a private message to this user
I use VMWare as my VM manager.
I have two Kerio operiotor VMs.
On Operator1 i setup a user named user1 ext=10.
On Operator2 i setup a user named user2 ext=11.
I use the 3cx phone as the soft phone.
I setup call routing on Operator1 (link to another pbx and i specified its IP address and a prefix for routing).
Now i want user1 to call user2.
On the soft phone i dialed 211 and the soft phone answered me with a "forbidden" message.
Is there anything wrong? PLease explain.
Another problem is i cannot integrate Operator with Connect.
Please see the attached screen shot.


  •  
Vladimir Toncar (Kerio)

Messages: 1696
Karma: 39
Send a private message to this user
Hi,

The integration with Connect requires Connect 7.1.2 or above.

Vladimir
  •  
elied

Messages: 16
Karma: 0
Send a private message to this user
I use VMWare as my VM manager.
I have two Kerio operiotor VMs.
On Operator1 i setup a user named user1 ext=10.
On Operator2 i setup a user named user2 ext=11.
I use the 3cx phone as the soft phone.
I setup call routing on Operator1 (link to another pbx and i specified its IP address and a prefix for routing).
Now i want user1 to call user2.
On the soft phone i dialed 211 and the soft phone answered me with a "forbidden" message.
Is there anything wrong? PLease explain.
  •  
ICT and Me

Messages: 940

Karma: 53
Send a private message to this user
Sorry Vladimir,

Your right. I switched the last numbers.

But Vladimir, even i can't connect to a second Operator.
Make a nice Call Routing to other PBX.
Based on IP. No user (extention) and PWD.
It looks good. No error sign. But no connection.
What could it be? Do you have a short manual how to setup?

ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
  •  
Vladimir Toncar (Kerio)

Messages: 1696
Karma: 39
Send a private message to this user
Hi,

We will look into this and get back to you later.

Vladimir
Previous Topic: Operator and DHCP
Next Topic: Kerio Operator behind NAT firewall
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Thu Nov 23 08:45:51 CET 2017

Total time taken to generate the page: 0.00435 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.