Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » Kerio Operator 1.1 RC1
  •  
Zdenek Samuel (Kerio)

Messages: 558
Karma: 22
Send a private message to this user
Hi all,

Kerio Operator 1.1.0 RC1 is ready for testing. You can download it here: http://www.kerio.cz/cz/betas/operator

With RC1, the Operator team focused on stabilization and bug fixing. The main bug fixes can be divided into the following categories:

Provisioning:
- It is now possible to add a second identity on a Snom m3 (DECT SIP phone)
- Corrected duplicity checks when adding provisioned phones manually (it was possible to add a second phone with the same HW address).
- Corrected duplicity checks during auto-discovery when you first entered a phone manually with a wrong model type and then connected the phone to the network.
- It is now possible to remove an auto-provisioned phone in one step (no need to remove extensions first).
- Changing phone type to Polycom IP 7000 erased the HW address.
- The dialog that offered phone restart after a major configuration change sometimes offered restart time that was very close to the current time. The algorithm now avoids those "close" times.
- The user name appeared twice on the display of Cisco 7960 phone - in the top line and in extension description. The name was removed from the top line.

Call forwarding:
- Call forwarding did not work with some SIP providers if you used the simple forwarding mode (ie. forwarding to a single number). The reason for this is that these SIP providers have a relatively short limits for ringing times. The limit can be easily exceeded when forwarding to a cell phone or some remote destination. The solution is to shorten the ringing time by accepting the call, playing a voice prompt and simultaneously dialing the forwarded destination.

Voicemail/E-mail integration with Kerio Connect:
- Voicemail messages were duplicated if you first configured sending of messages over SMTP and then enabled the integration with Connect (the SMTP configuration remained active).
- The error message after an unsuccessful integration handshake was too technical.

Telephony functions:
- Call transfer did not work on some phones (for example 3CX softphone). This was caused by a bug in Asterisk 1.4.38 we used in Operator 1.1. The problem has been solved by upgrading to Asterisk 1.4.41.

Browser support:
- Internet Explorer 7 and Internet Exprorer 8 incorrectly displayed warnings about insecure (plain-text HTTP) transfer when displaying notifications. This was solved by refactoring the code so that IE7 and IE8 like it better.
- Internet Explorer 8 displayed scrollbars in the Call Constraint edit dialog even if there was no need

Other issues in the Administration GUI:
- If you save a log in HTML format, it is now saved with highlighting.
- The System Health screen now remembers the selected time range
- Displayed columns and the setting of sorting are now remembered in almost all Admin GUI screens.
- SMTP authentication data were sometimes not stored when configuring the account for sending e-mail notifications

Zdenek Samuel
Director of QA
Kerio Technologies
Previous Topic: Default rule for detecting anomalous call patterns
Next Topic: Call Routing Fails for Incoming Calls
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Mon Oct 23 17:04:08 CEST 2017

Total time taken to generate the page: 0.00395 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.