Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » LOAD balancing Server 2008 (Control 7.2 RC 1)
  •  
Goran

Messages: 326
Karma: 5
Send a private message to this user
Sorry if some one ask before that question...

What is proper way to make load balancing...
2 internet:
1.
ip: X.X.1.10
gateway: x.x.1.254

2.
ip:x.x.2.10
gateway: x.x.2.3

So my question is...
What i need put in windows IP4 settings and what i need to put in Kerio interface settings?
also DNS server is on: x.x.0.2

My settings now are:
1.
ip:x.x.1.10
gateway: looks empty but i put:x.x.1.254
dns: x.x.0.2
in Kerio: i manually put Gateway to:x.x.1.254, DNS automatic from system

2.ip:x.x.2.10
gateway: looks empty but i put:x.x.2.3
dns: x.x.0.2
in Kerio: i manually put Gateway to:x.x.2.3, DNS automatic from system

So what is my problem, load balancing work but not like before on older versions, He using from (1) almost all bandwidth but from connection (2) only little. And on end of day i usually have that he use from connection (1) 10Gb of internet, and from connection (2) only 0.5Gb...
Or is there problem with QOS settings?

i using Balancing per connection option...

Kerio Control 7.2 RC 1

[Updated on: Mon, 25 July 2011 10:26]


Question cannot be stupid, but some of the answers can.
  •  
ICT and Me

Messages: 936

Karma: 53
Send a private message to this user
Goran, this should be a Beta question. Because of the use of RC 1.
The load balacing within RC1 will be done by weight look at the interfaces.
Precise settins is even for me not clear. Maybe someone else of the Beta group knows what it should be.

ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
  •  
Goran

Messages: 326
Karma: 5
Send a private message to this user
Thanks...
If will be used full bandwidth from one then from other, that means that first fill be always overloaded, and even if you reserve QOS for that interface,
High latency will be happened, Specially in gaming ports... --> I test that...

Question cannot be stupid, but some of the answers can.
  •  
azzamsalman

Messages: 61
Karma: -1
Send a private message to this user
i have kwf 6.6 and 2 adsl routers ( 192.168.1.1 ) ( 192.168.1.4) and 3g modem ( 188.73.26.45) , the 2 routers are connecting to server pc with 2 Ethernet cards with ips ( 192.168.1.3 gateway and dns 192.168.1.1 ) ( 192.168.1.2 gateway and dns 192.168.1.4 ) and the 3g modem is connecting to server pc with ip 188.73.26.45 >>>> when i choose load balancing i got three internet interfaces with weight 4Mb ,4Mb for each dsl link and 7 Mb for 3G
but what happened <<< all interfaces are up but just 3G modem is active and geting all traffic , the others are out of use even when i overloaded the 3g modem with downloads >>>> the routing table showing me that 2 adsl links having metric 20 but 3g is with metric 1 . i addition to that when i stoped the 3g modem , nothing happened just no internet in clients pcs

any help to have a workable setup for load balancing
  •  
Goran

Messages: 326
Karma: 5
Send a private message to this user
Your gateway... use for router other ip's like
192.168.2.1
192.168.3.1 etc...

Question cannot be stupid, but some of the answers can.
  •  
azzamsalman

Messages: 61
Karma: -1
Send a private message to this user
is it enough to solve the problem or there are another things i can check
  •  
azzamsalman

Messages: 61
Karma: -1
Send a private message to this user
can u give me the certain setup for load balancing to check it >
  •  
Goran

Messages: 326
Karma: 5
Send a private message to this user
Just change all internet and lan IP's how i already explain
i.e.
192.168.0.1 LAN
192.168.1.1 Router 1
192.168.2.1 Router 2
192.168.3.1 Router 3
etc...

Question cannot be stupid, but some of the answers can.
Previous Topic: 7.4.0 RC2 QoS
Next Topic: Slow - Kerio Control Administration and slow remote login to the server.
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Tue Sep 26 23:31:41 CEST 2017

Total time taken to generate the page: 0.00424 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.