Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Appliance hardware support
  •  
Goran

Messages: 332
Karma: 5
Send a private message to this user
Will appliance support this network cards?

D-LINK DFE-530TC
Realtek RTL8139/810x
D-LINK DFE-528TX

Question cannot be stupid, but some of the answers can.
  •  
Goran

Messages: 332
Karma: 5
Send a private message to this user
Ok i will wrote down where i test and work, may help to someone. 7.2.1

Realteck Semiconductor Co., LTD RTL-8169 Gigabit Ethernet (rev 10) WORK GOOD
Via Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86) WORK GOOD
3Com Corporation 3c905 100BaseTX [Boomerang] WORK GOOD

Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 15) WORK GOOD
Realteck Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) WORK GOOD
Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) WORK GOOD

I have problems with D-link network cards, mentioned in post 1.

Question cannot be stupid, but some of the answers can.
  •  
ICT and Me

Messages: 940

Karma: 53
Send a private message to this user
I have tested the following Realtek chipsets:
RTL-8110SC/8169SC
RTL-8111/8168B
They work but note full. They are Giga but get not that I get with Intel NIC's.
With I get 110-120 Mbit download with the RTL 50-60 Mbit. Same line, same Control config.
Just other cards

ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
  •  
Goran

Messages: 332
Karma: 5
Send a private message to this user
Thanks ICT!

Maybe because of that i have strange problems like i say in this link

I hope that Kerio will fix this problems soon!!

Question cannot be stupid, but some of the answers can.
  •  
ICT and Me

Messages: 940

Karma: 53
Send a private message to this user
@Goran,
I don't no, let's hope.

@Kerio
Guys, I'm testing two different systems with Atom CPU and 2 Gb Memory.
A 19" server with multiple 1 Giga NIC from Intel plus one Intel GBIC
And a small system with the earlier mentioned Realtek chipsets. 4x Giga NIC's.
On both systems I have preformance issue. Our normale used system with a QC CPU and 2 Gb memory and 4x Giga NIC from Intel has no performance problems.
On all systems was the same configuration beeing used. Same rules etc. The internet lines are the same.
We got a 120/10 Mpbs (primaire) and a 4/1 Mpbs (seconday) line.
Results:
The system with QC CPU running with speedtest a average of 118/9 on the primaire line
The systems with Atom CPU running a average of 55/8 on the primaire line.
What's causing this. And does the small Control box has the same problem ?

[Updated on: Sun, 04 December 2011 10:01]


ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
  •  
ICT and Me

Messages: 940

Karma: 53
Send a private message to this user
@Kerio,
Guys I think we have a problem. I have seen that the preformance of the 1110 Box is also as low as I reported.
But if we want to sell this kind of solution to the SMB here in the Netherlands then it must do better.
The average internetline has a download of between 40-120. At this moment there are tests underway to go 200 or 400 DL. And this is the SMB and private market. So consider what the higher market has. Giga isn't a strange thing for bigger companies or SMB who has the need for that kind of speed.

What will Kerio do about this problem?
Performance must be better for both solutions.
Or better said for the total product.

[Updated on: Fri, 09 December 2011 12:58]


ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
  •  
Goran

Messages: 332
Karma: 5
Send a private message to this user
Nice job ICT!!
Lets hope that Kerio will speedup there engine, seems to be slow.

Question cannot be stupid, but some of the answers can.
Previous Topic: VPN Server SSL Certificate
Next Topic: SIP / VOIP server behind Kerio Control
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Fri Nov 24 12:04:36 CET 2017

Total time taken to generate the page: 0.00453 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.