Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Setup Multiple internet Lines to single eth0 port in Control (Need to configure 4 internet lines to one LAN Interface, 2 now & 2 more later)
  •  
petermacman

Messages: 6
Karma: 0
Send a private message to this user
Running Kerio Control 7.2.1 Build 3301. This is all about load balancing and being able to manage all the links for fast internet and larger download capability. The 1st link is the more reliable business link and the other links are just residential links with faster bandwidth and downloads volume. Server HP Rackmount DL160 - (Software Base ESXi, WM), with 2 ethernet ports. Port 1 goes to Wan side and Port 2 goes to LAN Side. I was told that I could take 2 Links and connect modems via a switch which then connects to the single incoming WAN Side Port on the HP, i.e. if I have a WAN IP 203.203.203.30 coming through a modem1 (It's IP 10.10.10.1). And perhaps WAN IP 203.203.202.20 coming through a modem2 (It's IP 10.10.11.1).That is connected to the 8 port switch which then connects to the HP. Control is setup so a WAN Interface connects 10.10.10.1 and 10.10.11.1 as their own interfaces so that they cab managed independently for traffic control. Also I can setup the third and fourth connection in a similar fashion with different IP LAN addresses on the modems that match up with the same IP Interfaces in Control but I can't find out how to do that. Supposedly what this does is stops me from having to install extra nics.
SO what I am looking for is to find out how to setup 2 - 4 internet links (2 initially) to connect through a switch to the one incoming port on the HP.
Help please.

[Updated on: Thu, 29 December 2011 01:03]

  •  
ICT and Me

Messages: 940

Karma: 53
Send a private message to this user
It can be done, but I don't recommend it. All traffic goes on one fysical NIC so the real speed will be slower.
My advise is to insert more Real NIC's and VMware. Basic Intel 1 Giga (desktop) NIC's will do for professional setting. Otherwise there are good alternative with Realtek chipset giga.

ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
Previous Topic: More Linux Distros support - any plans ?
Next Topic: 8Gb Compactflash to small?????
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Sat Oct 21 21:22:10 CEST 2017

Total time taken to generate the page: 0.00369 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.