Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » Kerio Operator 2.0.0 Beta 3
  •  
Vladimir Toncar (Kerio)

Messages: 1696
Karma: 39
Send a private message to this user
Hi,

Kerio Operator 2.0.0 Beta 3 is now available. It comes with the following changes and improvements:

Kerio Operator Engine
* It is possible to retain the original Caller ID when forwarding an incoming call to an external destination (useful mainly when forwarding a call to another PBX since most SIP providers block this to prevent Caller ID spoofing).
* Operator's TFTP server can serve manually uploaded files (useful for tweaked configurations, logos, etc.)
* Added option to set BRI mode for ISDN cards (Point-to-MultiPoint required in some countries).
* Added option to choose the call-end signalling mode for analog interfaces.
* Fixed automatic provisioning for Snom phones with firmware 8.7.3.7 (the firmware asks for the provisioning files over HTTP by default, solved by redirecting from HTTP to TFTP)
* Fixed possible crash in the Asterisk process while reloading modules.
* Fixed SNMP that was influenced by the upgrade of the underlying OS.
* Fixed a bug in Asterisk when using SIP over TLS that could lead to the SIP error "503 - Service unavailable" with some software phones.
* Fixed automatic provisioning for Polycom with firmware 3.3.1.0769.
* Force auto-provisioned phones to update their time using NTP more often (every 12 hours for Snom, Polycom, Well/Yealink).
* Fixed the error displayed by the amid process on the text console when shutting down
* Added provisioning support for Yealink/Well T28.
* Auto-provisioned Polycom phones could display incorrect time in some timezones west of GMT.
* Auto-provisioned Snom phones could display incorrect time in some timezones east of GMT.
* Backup could fail randomly on very fast machines.
* The configuration file /etc/dahdi/system.conf was not included in the support information file

Kerio Operator Administration
* Fixed the settings of sorting in the Provisioned Phones grid that could be lost after upgrade.
* Phone configuration files generated for individual phones by automatic provisioning can be downloaded (to be edited manually and uploaded back to Operator's TFTP directory).

Happy Operating!
Vladimir

[Updated on: Thu, 28 June 2012 09:30]

Previous Topic: Cisco 7940G only outgoing
Next Topic: Corrected time zone settings for auto-provisioned Cisco 7961 phones.
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Thu Nov 23 01:07:46 CET 2017

Total time taken to generate the page: 0.00352 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.