Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » Can't Dialout on Multiple Interfaces (Phone will only dial 1 specific interface depending on Settings)
  •  
GazzaBot

Messages: 112
Karma: 0
Send a private message to this user
Hi,

We have Operator running with a Digium 4port ISDN card linked to the BRI ports on a Patton switch as well as a SIP interface to the Patton.

The SIP uses G729 codec. Extension is an Atcom 610-PR.

If I set my extension with G729 on top of the codec list:

I CAN call on SIP - CANNOT call on BRI.

If I set my extension with ALaw / other codec:

CANNOT call SIP - CAN call BRI.

Is there a way around this - that will allow the extension to choose a codec based on the Interface?

Thanks

GazzaBot
  •  
Vladimir Toncar (Kerio)

Messages: 1696
Karma: 39
Send a private message to this user
The extension does not know which external interface will be used for the second call leg when it establishes the first leg. The only solution would be to trans-code the audio on Operator. However Operator only supports G.729 in the pass-through mode, it cannot translate to/from G.729.

Vladimir
Previous Topic: Kerio Operator 2.0.0 RC 1
Next Topic: How to set up Operator to Operator connections?
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Fri Aug 18 06:48:58 CEST 2017

Total time taken to generate the page: 0.00377 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.