Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Cannot connect VPN after upgrade to v7.4.0-final (Will be fixed in the coming up patch)
  •  
Lucian Maly (Kerio)

Messages: 136
Karma: 8
Send a private message to this user
Arrow This is now confirmed as known issue that will be fixed in Kerio Control 7.4.0 patch 1 (very likely released on Nov 12th).

Arrow Please rest assured that this software deficiency will be prioritized accordingly with the urgency it deserves, and as soon as the fix has been implemented, we will push to have it released in a patch.

Idea Temporary workaround: add static route to network including local IP address of PPP interface to the PPP interface, e.g.: local_IP_of_PPP 255.255.255.254 ppp_iface (no gw) metric 1

Kerio Technologies AU Pty Ltd.
  •  
Richard Overhaus

Messages: 7
Karma: 1
Send a private message to this user
Detailed static route example "Kerio VPN Workaround":
Name: Kerio VPN Workaround
Network: WAN-IP adress
Mask: WAN-IP mask
Interface: LAN Switch
Gateway: -
Metric: 1

VPN client and tunnel connect successfully

Richard Overhaus
Overhaus Datentechnik GmbH
Kerio Certified Partner
Germany
  •  
silent_breaker1

Messages: 7
Karma: 0
Send a private message to this user
Had tried applying the 7.4.0 patch 1 but I am getting this kind of error.

Anyone from you guys experiencing the same?

./fa/2815/0/

  •  
Goran

Messages: 326
Karma: 5
Send a private message to this user

Question cannot be stupid, but some of the answers can.
  •  
Goran

Messages: 326
Karma: 5
Send a private message to this user
so in your case will go like this:

go to "C:\Documents and Settings\(YourUserName)\Local Settings\Temp" and delete all folders and files!!
(U must visible hiden files and folders) Control panel/folder options.
Then go in registry: (start/run: regedit)
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ --> Here find information about kerio installation. (go one by one you will find info about control)
For me is (20D10780D9AE3EE4BBFCC46547FB65DF) then find reg key "Transforms" and open.
Copy this value (..."{08701D02-EA9D-4EE3-BBCF-4C5674BF56FD}"...) then run older setup of winroute. (7.4.0 October 30, 2012)
When u got a message error don't press OK!!
go to "C:\Documents and Settings\(YourUserName)\Local Settings\Temp" and duplicate folder with new created name (similar to)"{ACDSF70-DA45-448F-B607-77008939E610}" then change name of this copy folder in name from registry!
In installation press ok.
Open (add/remove) and uninstal winroute...
Then you will be able to install new clean 7.4.0 patch 1 (or if you save config files) version.

Question cannot be stupid, but some of the answers can.
  •  
silent_breaker1

Messages: 7
Karma: 0
Send a private message to this user
Done, thanks very much Goran...

Goran wrote on Thu, 15 November 2012 12:00
so in your case will go like this:

go to "C:\Documents and Settings\(YourUserName)\Local Settings\Temp" and delete all folders and files!!
(U must visible hiden files and folders) Control panel/folder options.
Then go in registry: (start/run: regedit)
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ --> Here find information about kerio installation. (go one by one you will find info about control)
For me is (20D10780D9AE3EE4BBFCC46547FB65DF) then find reg key "Transforms" and open.
Copy this value (..."{08701D02-EA9D-4EE3-BBCF-4C5674BF56FD}"...) then run older setup of winroute. (7.4.0 October 30, 2012)
When u got a message error don't press OK!!
go to "C:\Documents and Settings\(YourUserName)\Local Settings\Temp" and duplicate folder with new created name (similar to)"{ACDSF70-DA45-448F-B607-77008939E610}" then change name of this copy folder in name from registry!
In installation press ok.
Open (add/remove) and uninstal winroute...
Then you will be able to install new clean 7.4.0 patch 1 (or if you save config files) version.

  •  
Goran

Messages: 326
Karma: 5
Send a private message to this user
Im glad it worked.

Question cannot be stupid, but some of the answers can.
Previous Topic: License & Servers ?
Next Topic: Chinese subnet
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Tue Aug 22 07:17:17 CEST 2017

Total time taken to generate the page: 0.00506 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.