Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » dual NIC routing issue
  •  
billbrigg

Messages: 40
Karma: 1
Send a private message to this user
Our Operator system has 2 NICs - one on the private (192.168.x.0) subnet, the other with a static public IP.
The SIP trunks are registering using the private IP, we want them to use the public IP.
How can we control this?
The routing table shows two default routes, one for each interface, and these routes cannot be edited or removed.
  •  
Filip Jenicek (Kerio)

Messages: 1094
Karma: 80
Send a private message to this user
Hi

you can configure the private interface not to obtain a gateway from the DHCP server. There is a radio for that at the bottom of the Edit Interface dialogue.

In addition, in case your private network is routed, you will need to add a static summary route to Operator.

Best
Filip
Previous Topic: outgoing extensions on system access ports
Next Topic: How to subscribe to kerio Operator Beta List
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Thu Nov 23 02:58:41 CET 2017

Total time taken to generate the page: 0.00353 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.