Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » KO 2.1.4 (After install problem)
  •  
iluwka

Messages: 27
Karma: -4
Send a private message to this user
Hi,after installing KO 2.1.4 on the server, I ran into a problem after the start of Kerio OS error appears (see screenshot), after the system has booted I tried to open the web interface, and saw this:

ockwell V2.21 [Viking.NTx86] %Modem4% = Modem4, PCMCIA\VIKING-V.90_5V/3.3V-AED2 [Rockwell5] include=mdmgl004.inf AddReg=All, MfgAddReg, ROCK_VOICE_UNIQUE_2, Rockwell5.AddReg, Supra_Numeric_Responses, INTERNAL, MDMGL004.ExtraCID DriverVer=03/09/2000 [Modem1] AddReg = All,All56K,Gen56kReg,PCMCIA,NonCombo [Modem2] AddReg = All,Modem2.AddReg,All56K,K56Flex,PCMCIA [Modem3] AddReg = All,Modem3.AddReg,Modem3.56K,K56Flex,PCMCIA [Modem4] AddReg=ALL,Modem4.AddReg,INTERNAL,All56K,K56Flex [Rockwell5.AddReg] HKR,, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00, f7,03,00,00, 00,c2,01,00, 80,70,00,00 HKR, Init, 2,, "AT &F2 E V Q0 W1 &C1 &D2 S95=47 S0=0<�cr>" HKR, Settings, ErrorControl_Off,, "&Q6\N" HKR, Settings, ErrorControl_On,, "&Q5\N3" HKR, Settings, ErrorControl_Forced,, "&Q5\N4" HKR, EnableDistinctiveRing, 1,, "at-sdr=7<�cr>" HKR,WaveDriver, WaveDevices, 1, 01, 00 [Modem2.AddReg] HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, FF,00,00,00, 07,00,00,00, 0F,00,00,00, F7,07,00,00, 00,C2,01,00, C0,DA,00,00 HKR,, VoiceProfile, 1,23,22,09,00 HKR,,InactivityScale, 1, 0a,00,00,00 HKR,,PortSubClass,	 1,02 HKR,,Reset,	 , "ATZ<�cr>" HKR, Answer, 1,, "ATA<�cr>" HKR, Hangup, 1,, "ATH<�cr>" HKR, Init, 1,, "AT<�cr>" HKR, Init, 2,, "AT&FE0V1&C1&D2S95=45S0=0<�cr>" HKR, Monitor, 1,, "ATS0=0<�cr>" HKR, Monitor, 2,, "None" [Modem3.AddReg] HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, FF,00,00,00, 07,00,00,00, 0F,00,00,00, F7,07,00,00, 00,C2,01,00, C0,DA,00,00 HKR,,Contention,,*vcd HKR,, DeviceType, 1, 03 HKR,, ConfigDelay, 1, b8, 0b, 00, 00 HKR, Settings, Blind_Off,	 , "X4" HKR, Settings, Blind_On,	 , "X3" HKR, Settings, CallSetupFailTimer,	, "S7=<�#>" HKR, Settings, Compression_Off,	 , "%%C" HKR, Settings, Compression_On,	 , "%%C3" HKR, Settings, DialPrefix,	 , "D" HKR, Settings, DialSuffix,	 , ";" HKR, Settings, ErrorControl_Off,	, "\N" HKR, Settings, ErrorControl_On,	 , "\N3" HKR, Settings, ErrorControl_Forced,	, "\N2" HKR, Settings, FlowControl_Off,	 , "&K" HKR, Settings, FlowControl_Hard,	, "&K3" HKR, Settings, FlowControl_Soft,	, "&K4" HKR, Settings, InactivityTimeout,	, "S30=<�#>" HKR, Settings, Modulation_CCITT,	, "B" HKR, Settings, Modulation_Bell,	 , "B1" HKR, Settings, Modulation_CCITT_V23,	, "+MS=3" HKR, Settings, Prefix,	 , "AT" HKR, Settings, Pulse,	 , "P" HKR, Settings, SpeakerVolume_Low,	, "L1" HKR, Settings, SpeakerVolume_Med,	, "L2" HKR, Settings, SpeakerVolume_High,	, "L3" HKR, Settings, SpeakerMode_Off,	 , "M0" HKR, Settings, SpeakerMode_Dial,	, "M1" HKR, Settings, SpeakerMode_On,	 , "M2" HKR, Settings, SpeakerMode_Setup,	, "M3" HKR, Settings, SpeedNegotiation"CONNECT 14400", 1, 02, 00, 40,38,00,00, 00,00,00,00 HKR, Responses, "CONNECT 16800", 1, 02, 00, A0,41,00,00, 00,00,00,00 HKR, Responses, "CONNECT 19200", 1, 02, 00, 00,4B,00,00, 00,00,00,00 HKR, Responses, "CONNECT 21r>" HKR, Responses, "CONNECT 0600", 1, 02, 00, 58,02,00,00, 00,00,00,00 HKR, Responses, "CONNECT 1200", 1, 02, 00, B0,04,00,00, 00,00,00,00 HKR, Responses, "CONNECT 2400", 1, 02, 00, 60,09,00,00, 00,


http://lvkr.ru/N6bGNy.jpg
  •  
Filip Jenicek (Kerio)

Messages: 1094
Karma: 80
Send a private message to this user
Hi

Please download Operator from https://www.kerio.com/operator/download and contact our sales department regarding the license.

Best
Filip
  •  
iluwka

Messages: 27
Karma: -4
Send a private message to this user
Hi, KO downloaded from the official site (ie from here), license reinstated.
Previous Topic: Implementing dynamic host for SIP
Next Topic: Company wide voicemail
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Fri Oct 20 05:08:24 CEST 2017

Total time taken to generate the page: 0.00336 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.