Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » pppoe Fehler/Error
  •  
mackd

Messages: 14
Karma: 0
Send a private message to this user
Hallo ich wollte mal Kerio als Router Ersatz Testen scheitere aber leider schon bei dem Versuch pppoe einzurichten.

Ich habe die Lan Schnittstelle ausgewählt wo das Modem dran verbunden ist. Diese ist in der Gruppe Internetschnittstellen. Einstellung Nativ mit IP.

Dann habe ich über hinzufügen PPPoE hinzugefügt die Internetschnittstelle ausgesucht und Benutzername und Passwort meines ISP eingegeben.
Aber leider bekomme ich nur die Meldung (Unable to complete PPPoE Discovery).
Nun weis ich nicht weiter wo liegt der Fehler ?

Hello I wanted to Kerio fail as a router replacement testing but unfortunately in trying to establish pppoe.

I have the LAN interface is selected when the modem is connected to it. This is the Internet interface in the group. Setting with native IP.

Then I added about PPPoE add the internet interface selected and entered my ISP username and password.
But unfortunately I only get the message (Unable to complete PPPoE Discovery).
Now I know not where is the problem?

./fa/3223/0/

  • Attachment: pppoe.JPG
    (Size: 41.62KB, Downloaded 547 times)
  •  
sorat

Messages: 59
Karma: 2
Send a private message to this user
Does your adsl modem connected directly to kerio's lan (second card, beside LAN, as i would think, yes?)

If yes, then for test, take any other PC or notebook, connect your modem, and try to make pppoe connection. See if it works?
  •  
mackd

Messages: 14
Karma: 0
Send a private message to this user
The individual clients have access to the modem and connect to PPPoE
  •  
sorat

Messages: 59
Karma: 2
Send a private message to this user
Do you use switches that *route* traffic?
  •  
bravo_prochu

Messages: 18
Karma: 0
Send a private message to this user
I gave up and right now im testing pfsense;
This is kerio Control problem;
The same hardware, but pfsense soft - there are no pppoe problem;

I noticed that it apears when You're working with full speed of Your Internet connection;
When I set PPPoE interface as a secondary with low priority - there was no problem. But I had only 30% speed;
On pfsense everything works great on fuul speed, i tried to find out what is going on, but no help on kerio side.


http://forums.kerio.com/m/107551/#msg_107551
  •  
Pavel Dobry (Kerio)

Messages: 5245
Karma: 251
Send a private message to this user
bravo_prochu wrote on Thu, 28 November 2013 00:26
I gave up and right now im testing pfsense;
This is kerio Control problem;
The same hardware, but pfsense soft - there are no pppoe problem;

I noticed that it apears when You're working with full speed of Your Internet connection;
When I set PPPoE interface as a secondary with low priority - there was no problem. But I had only 30% speed;
On pfsense everything works great on fuul speed, i tried to find out what is going on, but no help on kerio side.


http://forums.kerio.com/m/107551/#msg_107551


For technical support from Kerio please visit http://www.kerio.com/support
  •  
bravo_prochu

Messages: 18
Karma: 0
Send a private message to this user
...i tried !!!!!!!!

Previous Topic: Protocol inspector Problem after upgrade
Next Topic: Control Box 1110 System Recovery OK
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Thu Oct 19 16:39:49 CEST 2017

Total time taken to generate the page: 0.00434 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.