Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » Kerio Operator with SPA8800 (Do they work together?)
  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
Hi!

Need advice, Kerio Operator 2.2 will work with Cisco SPA8800 (SPA400 - not selling anymore)?
Do I have a problem with configurate SPA8800 with KO 2.2?

THX!
  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
Need configure 3 Analog lines! Maybe KO have another solution with hardware?
  •  
Vladimir Toncar (Kerio)

Messages: 1696
Karma: 39
Send a private message to this user
Hi,

We have not tested SPA8800 yet. I suppose it should not be that different from SPA400. An alternative would be to use Digium's analog card, or look at the brands described at http://kb.kerio.com/category/kerio-operator/gateways/

Vladimir
  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
Все время в логах пишет это:
[18/Mar/2014 17:43:18] asterisk[2070]: WARNING[2187]: chan_sip.c:21518 in handle_response: Host '192.168.200.60:5060' does not implement 'REGISTER'

Kerio Operator 2.2.3 (192.168.200.199)
./fa/3364/0/

  • Attachment: kerio.PNG
    (Size: 99.55KB, Downloaded 1194 times)

[Updated on: Tue, 18 March 2014 13:01]

  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
Подключен следующим образом:
Телефонная линия (номер - к примеру 333333) в Line1 (cisco) из spa8800 ethernet cabel to switch (hub) - 192.168.200.60, к свичу так же подключен сервер Kerio Operator 2.2.3 - 192.168.200.199, и клиентский компьютер 192.168.200.43.

Помогите пожалуйста настроить Керио?
2 Аналоговые линии - Керио должен снимать звонок записывать его, должен работать автосекретарь и так далее по мелочи.
Так же нужен программный телефон который поддерживает Керио Оператор!


Cisco SPA8800 (192.168.200.60 - DHCP)
./fa/3362/0/


  • Attachment: spa8800.PNG
    (Size: 276.33KB, Downloaded 1249 times)
  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
В Циско сказали что настроек на самом аппарате можно и не производить кроме настройки сети и пользовательских паролей!
./fa/3363/0/
КУДА КАПАТЬ ???

  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
If needed, can give all access to KO and SPA!
теперь такая проблема:
[18/Mar/2014 19:02:06] asterisk[25560]: WARNING[25577]: chan_sip.c:21518 in handle_response: Host '192.168.200.60:5060' does not implement 'REGISTER'

[Updated on: Tue, 18 March 2014 14:03]

  •  
Vladimir Toncar (Kerio)

Messages: 1696
Karma: 39
Send a private message to this user
I am just guessing - if SPA8800 does not support SIP registration, have a look at the article about SPA3102. It's an example of how to connect Operator with a Cisco/Linksys gateway without using the SIP registration.
  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
This is Line 1 - menu (attached)

  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
Try with this manual (attached), but nothing, do I need make any changes?
PLZ need Advice!

  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
  •  
Vladimir Toncar (Kerio)

Messages: 1696
Karma: 39
Send a private message to this user
The SPA 8800 seems to have a newer GUI than the older SPA gateways (like SPA 3102). The GUI in fact looks similar to SPA 400 and we have a knowledge base article for the SPA400 - http://kb.kerio.com/product/kerio-operator/gateways/configur ation-with-the-cisco-spa-400-fxo-gateway-1104.html (sorry for pointing you to the 3102 before).

Hope this helps,
Vladimir
  •  
maojan

Messages: 22
Karma: -4
Send a private message to this user
Now i have next problem:
The SPA8800 says that he all ready
PSTN Line 1 Status
Hook State: On Line Voltage: 49 (V)
Loop Current: 0.0 (mA) Registration State: Registered
Last Registration At: 3/30/2014 10:41:13 Next Registration In: 116 s
Last Called VoIP Number: Last Called PSTN Number:
Last VoIP Caller: Last PSTN Caller:
Last PSTN Disconnect Reason: PSTN Activity Timer: 30000 (ms)
Mapped SIP Port: Call Type:
VoIP State: Idle
PSTN State: Idle VoIP Tone:

Kerio Operator says that he know SPA8800
[30/Mar/2014 09:56:57] Asterisk: Authentication failed from host 192.168.200.60 (uri:"SPA8800" <sip:266224<_at_>192.168.200.199>). Attempts: 3.
[30/Mar/2014 09:56:57] Asterisk: Authentication failed from host 192.168.200.60 (uri:"SPA8800" <sip:266224<_at_>192.168.200.199>). Attempts: 4.
[30/Mar/2014 10:12:53] Asterisk: Authentication failed from host 192.168.200.60 (uri:"SPA8800" <sip:266224<_at_>192.168.200.199>). Attempts: 3.
[30/Mar/2014 10:12:54] Asterisk: Authentication failed from host 192.168.200.60 (uri:"SPA8800" <sip:266224<_at_>192.168.200.199>). Attempts: 4.
[30/Mar/2014 10:32:54] Asterisk: Authentication failed from host 192.168.200.60 (uri:"SPA8800" <sip:266224<_at_>192.168.200.199>). Attempts: 3.
[30/Mar/2014 10:32:54] Asterisk: Authentication failed from host 192.168.200.60 (uri:"SPA8800" <sip:266224<_at_>192.168.200.199>). Attempts: 4.
[30/Mar/2014 10:41:13] Asterisk: Authentication succeeded from host 192.168.200.60 (uri:"SPA8800" <sip:11<_at_>192.168.200.199>). Resetting attempts.

Registerred 10 extension (Operator) on clinet 192.168.200.43 by Ekiga softphone.
Try call to number on Line 1 (333333) but nothing - client dothent see the call, call history empty, autosecretary not works.

Please Help!
  •  
Vladimir Toncar (Kerio)

Messages: 1696
Karma: 39
Send a private message to this user
Did you enter the SPA's IP address in Operator in the Interface configuration? This looks like the address is unknown and Operator blocks it after 10 attempts.
maojan

Messages: 22
Karma: -4
Send a private message to this user
Yes!

All my configurations you can find in attached archive!

Previous Topic: Operator and Connect Integration
Next Topic: Phones supported in auto-provisioning - Cisco Linksys
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Wed Aug 23 21:34:20 CEST 2017

Total time taken to generate the page: 0.00592 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.