Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » Autoprovisioning with DHCP option 66 (Autoprovisioning Yealink handsets with DHCP option 66)
  •  
ESP Projects

Messages: 115
Karma: 5
Send a private message to this user
Fundementally, we are comfortable in setting DHCP options. However, what we can't seem to find anywhere on the forums or documentation is the actual setting required for DHCP and it's syntax. Should we for example set DHCP option 66 to be the IP of our phone system (in our case 192.168.1.97) in the format 192.168.1.97 OR http://192.168.1.97 OR https://192.168.1.97 or some other syntax? Our DHCP router (a Draytek router) is able to configure any of the above. We have also read on occasion that option 67 might be required. We are trying to provision Yealink handsets by the way.
  •  
ICT and Me

Messages: 936

Karma: 53
Send a private message to this user
Use option 66 with IP or FQDN only and it will work.

ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
  •  
ESP Projects

Messages: 115
Karma: 5
Send a private message to this user
We did try with just the IP address of Kerio Operator but it didn't seem to work. Have you managed to do this yourself using a Draytek Router?
  •  
ICT and Me

Messages: 936

Karma: 53
Send a private message to this user
Draytek, Kerio Control, Juniper, etc.
All normal working. But I don't work with Yealink.

ICT and Me
Carlo Turk
The Netherlands
www.ictandme.nl
  •  
Filip Jenicek (Kerio)

Messages: 1094
Karma: 80
Send a private message to this user
Hi,

all phones which are supported by Operator can process option 66 with an ip address stored as a string, e.g. "192.168.1.1".

Yealink phones should also understand "http://192.168.1.1" or "tftp://192.168.1.1", but I would recommend using an ip address.

Filip
Previous Topic: [SOLVED] Forward/fallback when in DND mode
Next Topic: Kerio Operator 2.3.3 Patch 2
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Thu Aug 17 23:28:34 CEST 2017

Total time taken to generate the page: 0.00388 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.