Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Kerio Control 7.4.2 transparent proxy dont work :(
  •  
milenjs

Messages: 3
Karma: 0
Send a private message to this user
On Windows XP machine all is OK but with same configuration to server 2012 browsers cannot get automatic proxy settings. With manual configuration (IP and 3128 as port) all is OK.
Is it possible to fix this problem and all browsers automaticly detect settings ?

[Updated on: Sun, 05 April 2015 14:18]

  •  
Vicky Tripp (Kerio)

Messages: 630

Karma: 81
Send a private message to this user
Hi Milen,

If you have a look at this KB article:

http://kb.kerio.com/product/kerio-control/proxy-server/confi guring-proxy-server-1383.html

It shows how you can set the browser to auto detect the settings for the proxy server. Apologies if you have already done this.

I hope this helps,
Vicky

Vicky Tripp
Kerio Technical Support Engineer
  •  
milenjs

Messages: 3
Karma: 0
Send a private message to this user
I'm read this manual but problem is not here.
With PC and Windows XP all is working fine, all clients browsers is finding automatically proxy settings.
With other PC (running server 2012) this not work. I export configuration from XP machine and import on 2012 server. Client computers have internet only with manual proxy entered. When select in browser automatically detect proxy - internet is missing.
  •  
GMarciales

Messages: 8

Karma: 0
Send a private message to this user
Cisco IOS

ip dhcp pool VLAN10
network 10.10.10.0 255.255.255.0
update dns both override
domain-name domain.com
default-router 10.10.10.1
dns-server 172.16.1.130 172.16.1.131
netbios-node-type p-node
option 42 ip 172.16.1.129
option 252 ascii http //10.10.10.1:3128/pac/proxy.pac
lease 0 4
update arp


Look for in Google about DHCP option 252


Regards!
Previous Topic: Setuping Kerio. Confusion.
Next Topic: Нow can i load-balance vpn-tunnel traffic over two links?
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Sun Feb 19 15:16:39 CET 2017

Total time taken to generate the page: 0.00989 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.