Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » remove ISDN card entry (call routing showing ISDN30)
  •  
gaselec

Messages: 13
Karma: 0
Send a private message to this user
We used to have a system with a Digium ISDN30 card. We moved to VOIP only and stopped using it. We then built a new hardware box without a Digium card in but used the old image to do so. In Call routing we can see Interface. ISDN30 but no hardware to configure of course. Can we remove this entry?

S G Baker GAS Electronic Systems Ltd
  •  
Filip Jenicek (Kerio)

Messages: 1094
Karma: 80
Send a private message to this user
Hi,

yes, there should be a button to remove the hardware card interface.

Filip
  •  
gaselec

Messages: 13
Karma: 0
Send a private message to this user
Where would this button be? We are using 2.3.5 patch 1 build 4309

S G Baker GAS Electronic Systems Ltd
  •  
Filip Jenicek (Kerio)

Messages: 1094
Karma: 80
Send a private message to this user
http://s1.postimg.org/ftquuiysf/hw_card_remove.png

[Updated on: Fri, 12 June 2015 13:30]

  •  
gaselec

Messages: 13
Karma: 0
Send a private message to this user
your interface is shown in bold as is my new SIP one. But the old ISDN interface one isn't and when highlighted the screen looks like this.
http://tinyurl.com/o7xr72r

S G Baker GAS Electronic Systems Ltd
  •  
Filip Jenicek (Kerio)

Messages: 1094
Karma: 80
Send a private message to this user
I see. It looks like something is definitely wrong. Can I ask you to contact me on <fjenicek<_at_>kerio.com>.

Unfortunately, I will be away from the office next week so I will respond the week after.
Previous Topic: Cisco 7937 IP Phone
Next Topic: hacked?
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Sun Sep 24 19:28:01 CEST 2017

Total time taken to generate the page: 0.00468 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.