Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Connect Multi-Server » First install KCMS - report and suggestions
  •  
Michael Monnerie

Messages: 4
Karma: 0
Send a private message to this user
I've first-time setup Kerio now, in multiserver setup. I followed your guide
kb.kerio.com/product/kerio-connect/kerio-connect-multi-serve r/installing-kerio-connect-multi-server-1775.html
which I like because it's good and short for advanced admins. What is missing though, is some introduction about the concepts (though the picture explains a lot, some text would be nice).

I used dhcp for the servers as needed, which I immediately setup to give a fixed IP to the various VMs. This messes up the setup obviously, as IPs changed. As I don't know the concept behind, I recreated the VMs and installed new, ensuring the correct IP is assigned before installation this time. There should be a possibility to re-install a VM (reset into fresh mode from CLI) in case it stopped in the setup process, so that an error isn't that hard.
Even better: provide a menu to setup a fixed IP. We would never run a KCMS environment where the servers need a DHCP.

It was also not clear that the name of the puppet master should be DNS resolvable.

When Kerio asks for the Admin password, it mentions that it needs to be at least 8 chars I took one that is 7 chars, and was accepted. Either change docu or program.

Now I have the VMs installed. But there are some questions open:
It seems the backend on port 4040 has the config interface, and I licensed it.

I can see „Instant Messaging" is red, so not running. I didn't configure it until now. When trying to access it on port 4040, it asks for the „Internet hostname" again. Should this be a different one than the one from frontend? I went through the process, it was the same than on „backend". I don't understand the difference of backend and IM. Can you elaborate? I found no docs of IM in multiserver setup. How do we get IM running in KCMS?

Now I configured a lot in the backend interface already, and had to change IPs for the servers again. On the puppetmaster and backend the mysql/mariadb doesn't start up anymore. I have no idea how to fix that, the error log is very uninformative. What do I need to do?

When trying to send e-mail into KCMS on port 25, we get "internal error", is that because of the not running DBs?

Maybe we should re-install again. How can we save the config we already did, to import it in the new installation?

To sum up: Many small annoying things that could be improved, especially the setup process and the docu for the concepts, and what the different roles are for and what they need.


Michael Monnerie
  •  
Michael Monnerie

Messages: 4
Karma: 0
Send a private message to this user
I found the "hosting guide" in the KB, which provides a nice overview:
kb.kerio.com/product/kerio-connect/hosting/kerio-connect-hos ting-guide-1257.html

Michael Monnerie
  •  
nate.keegan

Messages: 46
Karma: 0
Send a private message to this user
I hope this helps.

Installation order
==================
Puppet
LDAP/Directory
Back-End Server(s) - at least on here, more can be installed later
IM Server
Front-End Server(s)


Set primary domain
==================
Needed in our setup as our DNS domain (ad.foo.org) is not the same as our email domain (foo.gov)

The primary domain needs to be set on the Back-End server under Configuration widget > Domains

Right click domain that you want to be primary and click 'Set as primary', repeat process on each Back-End server


IM setup
========
For IM you go to the first Back-End server and choose the Configuration widget > Domains

Right-click any white space in the main window and choose 'Distributed Domains'. You should see any other Back-End servers (if you have them) and the IM server as 'Available'.

Login to the web console on your IM server (http://kerio-im:4040 for example) and choose the Configuration widget > Domains

Right click any white space in the main window and choose Add > Distributed Domain

Choose the domain that you want to enable IM for and then 'OK'

Set the target domain as your primary domain on the IM server if you are in a single domain setup and your DNS domain is different than your email domain.

Note that your load balancer will use the same service side VIP but will send XMPP/XMPPS traffic to the IM server and not to the Front-End Server(s) or Back-End Server(s) if that makes sense.

In our environment we have a single VIP that targets all services (HTTP, HTTPS, IMAP, IMAPS, POP, POPS, SMTP, SMTPS, SMTP Submission) to the Front-End Servers except for XMPP and XMPPS which target the IM server.
Previous Topic: changing IPs in KCMS
Next Topic: Multiple front-end architecture
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Sun Aug 20 13:54:13 CEST 2017

Total time taken to generate the page: 0.00925 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.