Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » Autoprovisioning set permissions (persmissions snom 320)
  •  
HB

Messages: 32
Karma: 0
Send a private message to this user
I would like to know how to provision SNOM phones with RW permisssions.
Standaard permissions are just "R"
Is there a template override for giving permisssions "RW"
I tried this ;
ntp_server perm="RW": {$NTP_PRIMARY}
timezone perm="RW": BRA2-3
utc_offset: {$TIMEZONE_OFFSET}
ntp_refresh_timer perm="RW": {$NTP_REFRESH}
http_user: admin
http_pass: {$ADMIN_PASSWORD}
http_client_user: admin
http_client_pass: {$ADMIN_PASSWORD}
admin_mode_login: admin
admin_mode_password: {$ADMIN_PASSWORD}
admin_mode_password_confirm: {$ADMIN_PASSWORD}
filter_registrar: off
network_id_port: 5060
@if ($firmware_status) {
firmware_status: http://{$OPERATOR_IP}{$firmware_status}
@ } else {
firmware_status:
@ }
firmware_interval: 5
update_policy perm="RW": auto_update
settings_refresh_timer perm="RW": 3600
answer_after_policy!: idle
challenge_checksync: on
auto_dial: {$AUTODIAL_TIMEOUT}
Only the ntp_server perm does work
Hope to hear from you soon !

HB
  •  
Filip Jenicek (Kerio)

Messages: 1078
Karma: 78
Send a private message to this user
It is the last character !&$ that matters, for example "user_host{$i}$: {$OPERATOR_IP}" will be read-only.

For more information see < http://wiki.snom.com/Category:Auto_Provisioning:Configuratio n_Files>
Parameter names can be followed by one specific character called flag:

    A parameter followed by ! can be changed by the user. However the parameter value will only be stored if that parameter has not been configured yet. Only parameters followed by $ can be overwritten, DO NOT use ! in that case.
    A parameter followed by & (or no flag) becomes write-protected (read only)
    A parameter followed by $ can be changed but will be overwritten on reboot. $ will appear on the Settings page as ! (available from firmware version 4.2 onwards)

I find the "!" a bit tricky as it will be stored only if the field hasn't been already configured. A phone needs to be reset in order to use an updated value.
Previous Topic: Caller ID from MYSQL Database
Next Topic: Registration lost after upgrade to 2.4.4 patch 1
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Tue Jan 24 16:25:16 CET 2017

Total time taken to generate the page: 0.00754 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.