Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Service Discovery/ Zeroconf / Bonjour Gateway not working
  •  
valshare

Messages: 85
Karma: 0
Send a private message to this user
Hello,

i have the follow networks:

WLAN with VLAN990 on Subnet 10.255.250.0/24
LAN with no VLAN Tag on subnet 192.168.3.0/24
AirPrinter with IP 192.168.3.4 listen on IP 192.168.3.4
Firewall rules allow accept the LAN from the WLAN.

I have followed the kb1710. On Kerio Control i have enabled zeroconf and upnp for the WLAN and LAN

I want to print from my iOS Devis with iP 10.255.250.x on my AirPrint on 192.168.3.4 the printer will not be found.

Debug shows me:

[10/Jan/2016 12:06:21] {zeroconf_service} mDNS: packet from 192.168.3.4:5353 to 224.0.0.251:5353, ttl: 255
[10/Jan/2016 12:06:21] {zeroconf_service} UPnP UDP: packet from 10.255.250.18:59697 to 239.255.255.250:1900, ttl: 1


Now i have installed a avahi-daemon with the option enable-reflector=yes on a server on subnet 192.168.3.0 with the ip 192.168.3.3 and enabled a network interface on vlan 990 with ip 10.255.250.4 on the server. Startet avahi-daemon and now i can find the wanted air printer.

Debug shows me:

[10/Jan/2016 12:49:50] {zeroconf_service} mDNS: packet from 192.168.3.3:5353 to 224.0.0.251:5353, ttl: 255
[10/Jan/2016 12:49:53] {zeroconf_service} UPnP UDP: packet from 10.255.250.18:59697 to 239.255.255.250:1900, ttl: 1


Kerio Control has the latest firmware. Whats wrong with my kerio control setup?

[Updated on: Sun, 10 January 2016 13:14]

  •  
valshare

Messages: 85
Karma: 0
Send a private message to this user
can anyone from kerio help?
  •  
valshare

Messages: 85
Karma: 0
Send a private message to this user
Previous Topic: Blackberry 10 VPN
Next Topic: Can't limit internet access to a specific active directory group
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Mon Oct 23 02:24:08 CEST 2017

Total time taken to generate the page: 0.00353 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.