Home » Kerio User Forums » Kerio Operator » Call Routing / Interfaces

Messages: 13
Karma: 2
Send a private message to this user

Is there a way to bind an interface in call routing options to a specific IP address or eth interface? This is the backround: 2 internet links with 2 routers. So there are 2 eth interfaces configured on the operator box with 2 different gateways (e.g. and for the two routers). There are 3 numbers which have to be routed by and 3 numbers which have to be routed by

Thank you
Filip Jenicek (Kerio)

Messages: 968
Karma: 80
Send a private message to this user

Operator doesn't support load balancing and as such must not be configured with multiple default gateways. If it has more than one default gateway, traffic will leave through a random one and you will be experiencing various issues.

If you need some advanced routing, I suggest you to use a router in front of Operator. However, even in such setup, Operator would use a single public IP address in all SIP packets.

ESP Projects

Messages: 130
Karma: 5
Send a private message to this user
You could probably achieve this if you had different sip trunk providers, then route traffic based on destination IP.
Previous Topic: Multiple FTP locations
Next Topic: Password Reset - Hyper V 2012
Goto Forum:

Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Thu Jan 17 20:11:58 CET 2019

Total time taken to generate the page: 0.76871 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.