Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » WAN tries to get DHCP from Control's LAN if DHCP is enabled
  •  
jassu

Messages: 23
Karma: -1
Send a private message to this user
Hello!

I have been running device at my lab testing different things. I have LAN-network configured to be NATted and then theres WAN wich is bridget to operators VDSL-box.

Everything works like a charm with traffic until i enable DHCP for my LAN-pool (192.168.10.0/24) - after that also my WAN takes ip from the WAN-pool and yes, of course it wont work. WAN should get it's ip from operators DHCP, like it is doing it properly when control's DHCP is disabled.

Static ip is not an option, because the operator is not supporting it. Thats why the WAN ip must be from operators DHCP.

Why the WAN is trying to get it's address from the local network, when DHCP is enabled for the LAN?
  •  
jassu

Messages: 23
Karma: -1
Send a private message to this user
Ok, i blocked the wans MAC getting to the LAN-switch. And the problem went away.

  •  
Petr Dobry (Kerio)

Messages: 772
Karma: 60
Send a private message to this user
That sounds like your WAN and LAN interfaces are connected to the same network (switch). They should be separated either by VLANs or using different switches.

Petr Dobry
Product Development Manager | Kerio

Stay Connected Anytime, Anywhere. Discover Kerio Cloud!
Looking for help ? - http://kb.kerio.com
Previous Topic: WAN tries to get DHCP from Control's LAN if DHCP is enabled
Next Topic: Best way of allowing Kerio Connect services using custom ports?
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Sat Dec 03 22:45:10 CET 2016

Total time taken to generate the page: 0.00964 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.