Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Kerio VPN Routing Problem (some networks are not reached from kerio vpn, but only from local network)
  •  
f.boldori1

Messages: 16
Karma: 1
Send a private message to this user
Hello, i have 2 kerio control sites (9.2.2) and a KerioVPN Tunnel between them. Call Them siteA and SiteB.
SiteA have 10.1.10.0/24 network, SiteB have 10.0.10.0/24.
In SiteA, i have another vlan interface (TRUNK), after the WAN and LAN1 (10.1.10/24) connected to a Pfsense GW and a Route to route all traffic direct to 192.168.0.0 to that Pfsense GW (that is the main router for another business unit) to reach all the servers of the 192.168.0.0/24
On Pfsense GW i have another route to redirect all 10.1.10/24 and 10.0.10/24 traffic on that trunk interface (TRUNK) to send back traffic to Kerio on SiteA for rerouting.

From eache site a can reach all the servers (both ways)
SiteA can reach 192.168.0.0 network via interface TRUNK
SiteB can reach 192.168.0.0 network via KerioVPN Tunnel to SiteA and then via TRUNK interface.
192.168.0.0 network can reach the servers on SiteA and SiteB. All is working.

On Site B i have also the entry point for VPN Users. Here the problem: the vpn users cannot see the 192.168.0/24 network! Pfsense firewall does not block any traffic at all (for testing ALL is allowed from any network on the trunk to SiteA firewall interface).

It's seem that the user connected via KerioVPN cannot handle the routing and dosnt find the correct route to 192.168.0.0/24
any hint?

[Updated on: Thu, 06 July 2017 13:45]

Previous Topic: Problem with HTTPS
Next Topic: Kerio Control vulnerable ? Stack Clash ?
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Thu Jul 27 06:45:02 CEST 2017

Total time taken to generate the page: 0.00379 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.