Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Operator » How to setup SIP Account in Kerio Operator with 2 LAN cards (How to setup SIP Account in Kerio Operator with 2 LAN cards)
  •  
xian

Messages: 3
Karma: 0
Send a private message to this user
Hi,

I have a Kerio Operator installed in a PC with 2 LAN cards. One is connected to a router (eth2) and the other in an ONUs (eth3), the eth2 is for Internet and LAN connection while eth3 is for SIP.

The network is something like this:
Eth2
IP: 10.0.1.240
Mask: 255.255.255.0
Gateway: 10.0.1.1
Eth3
IP: 192.168.1.44
Mask: 255.255.255.192
Gateway 192.168.1.6

I add an SIP Interface in Call Routing, but it's not registering. I have a feeling that it is using Eth2 instead of Eth3.

Is there anything I need to do, to tell the SIP Interface to use Eth3?

Thanks in advance.

Regards,

Xian
  •  
Brian Carmichael (Kerio)

Messages: 725
Karma: 70
Send a private message to this user
You should have only one default gateway. So you need to choose which Interface should be used for Internet access and remove the gateway from the other interface.

Brian Carmichael
Senior Technical Marketing Engineer | Kerio
Stay Connected Anytime, Anywhere. Discover Kerio Cloud!
  •  
xian

Messages: 3
Karma: 0
Send a private message to this user
Hi Brian, thank you for your reply. I did it, but it's still not registering. Maybe I did something wrong. Attached it the screenshot.

[Updated on: Thu, 03 August 2017 08:24]


Regards,

Xian
  •  
Brian Carmichael (Kerio)

Messages: 725
Karma: 70
Send a private message to this user
Your network configuration looks correct assuming the server you are registering to is reachable from the Internet via Eth2. I suggest contacting our technical support and providing them with the error message you're receiving when trying to register.

Brian Carmichael
Senior Technical Marketing Engineer | Kerio
Stay Connected Anytime, Anywhere. Discover Kerio Cloud!
  •  
xian

Messages: 3
Karma: 0
Send a private message to this user
Hi Brian,

I manage to make it work.
And yes is nothing wrong with the network.

Regards,

Xian
Previous Topic: Problems with voicemail
Next Topic: Cisco SPA 112 Transferring from External Calls
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Thu Aug 17 15:42:44 CEST 2017

Total time taken to generate the page: 0.00435 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.