Home » Kerio User Forums » Kerio Operator » updateChecker fails

Messages: 32
Karma: -8
Send a private message to this user
Hello, i have the Kerio Operator Vers. 2.5.5 Patch2 and my Problem is that the updateChecker fails.
In the debug-log i found this after activate the updateChecker-Log :
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: check started.
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: Starting: /bin/ip -f inet -oneline link show
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: Command /bin/ip -f inet -oneline link show channel -11 output:
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: Command /bin/ip -f inet -oneline link show channel 1 output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default \ link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000\ link/ether 40:8d:5c:d6:0f:ae brd ff:ff:ff:ff:ff:ff
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: Command /bin/ip -f inet -oneline link show returned with code 0
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: Starting: /usr/bin/lspci -d '0x10ec:0x8168'
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: Command /usr/bin/lspci -d '0x10ec:0x8168' channel -11 output:
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: Command /usr/bin/lspci -d '0x10ec:0x8168' channel 1 output:
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: Command /usr/bin/lspci -d '0x10ec:0x8168' returned with code 0
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: SAAS reporter initialized (directory /var/operator/saas)
[03/Aug/2017 18:01:49] {updatechecker} updateChecker[24301]: SAAS reporting started
[03/Aug/2017 18:01:50] {updatechecker} updateChecker[24301]: SAAS reporting finished with result 0
[03/Aug/2017 18:01:50] {updatechecker} updateChecker[24301]: SAAS reporter destroyed

Previous Topic: phone LDAP directory lookup to Kerio Connect
Next Topic: Connecting two Kerio Operator
Goto Forum:

Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Tue Nov 20 00:52:35 CET 2018

Total time taken to generate the page: 0.74161 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.