Home » Kerio User Forums » Kerio Control » Kerio VPN - traffic to one device only flowing one way
  •  
Brent

Messages: 2
Karma: 0
Send a private message to this user
I'm using two Kerio Control hardware appliances to establish a Kerio VPN between two sites.

Site A can ping all hosts except for one. Site B can ping everything at site A.

The host that we can't ping from site A has communication with everything else and I can ping everything at site A ok directly from that problem device. If I ping the host with the problem from the Kerio firewall at site B I get a reply.

If I do a tracert from Site A to the problem host at site B it gets to the Kerio VPN Server at site A then the traffic is dropped.

Any ideas what would be causing this? If it was the host itself I wouldn't be able to ping it from the Kerio firewall at site B but I can. If it was a traffic rule I wouldn't be able to talk to the other devices at Site B. Traffic to that one device is only flowing one way.
Previous Topic: MAC Filter Log
Next Topic: How to disable guest welcome page for guest network?
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Tue Oct 16 16:27:23 CEST 2018

Total time taken to generate the page: 0.94527 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.