I'm trying to set up a trial version of Kerio Winroute Firewall 6.0.9 to test it in a new server environment. The hardware and software meet all Kerio requirements. ICS & ICF disabled. TCP is set up and running correctly without firewall. To use adsl internet i need to make VPN connection to ISP (GRE+PPTP protocols in use). I've tried to use wizard, set up manually Traffic Rules, but nothing is working.
The problem is that without KWF everything is working fine. But when i'm starting firewall i can't connect to ISP's vpn-gate, though i can ping it. Also i can't ping ADSL modem interface (192.168.1.1) and default gateway.
Right now the first thing to do is to be able to make pptp connection to ISP from firewall host.
What could be the problem? Or is it just a bug of my computer?
Configuration is as follows:
I've switched off all other options in KWF except DNS forwarder.
LAN(192.168.34.1, no gateway)<->switch
WAN(10.53.100.186, gateway 10.53.100.185)<->ZyXEL(192.168.1.1, bridge)
IPv4 route table
0x1 ........................... MS TCP Loopback interface
0x10003 ...SURECOM EP-320X-R 100/10M PCI Adapter (10.53.100.186)
0x10004 ...Marvell Yukon 88E8053 PCI-E Gb Ethernet (192.168.34.1)
Net addr Net mask Gateway addr Interface Metr
0.0.0.0 0.0.0.0 10.53.100.185 10.53.100.186 1
10.53.100.184 255.255.255.252 10.53.100.186 10.53.100.186 1
10.53.100.186 255.255.255.255 127.0.0.1 127.0.0.1 1
10.255.255.255 255.255.255.255 10.53.100.186 10.53.100.186 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.34.0 255.255.255.0 192.168.34.1 192.168.34.1 1
192.168.34.1 255.255.255.255 127.0.0.1 127.0.0.1 1
192.168.34.255 255.255.255.255 192.168.34.1 192.168.34.1 1
18.104.22.168 240.0.0.0 10.53.100.186 10.53.100.186 1
22.214.171.124 240.0.0.0 192.168.34.1 192.168.34.1 1
255.255.255.255 255.255.255.255 10.53.100.186 10.53.100.186 1
255.255.255.255 255.255.255.255 192.168.34.1 192.168.34.1 1
Default gateway: 10.53.100.185
Persistent routes: None
Kerio discussion forums are intended for open communication between forum
members and may contain information and material posted by members which may
be useful in learning about Kerio products. The discussion forums are not
intended to provide technical support for any specific product. Any
information implied or expressed in the discussion forums is that of the
posting member. Kerio is in no way responsible for the information posted in
the forums, or its accuracy. Kerio employees may participate in the
discussions, but their postings do not represent an offical position of the
company on any issues raised or discussed. Kerio reserves the right to
monitor and maintain the forums to promote free and accurate exchange of