Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » LAN & VPN network browsing
  •  
Javor

Messages: 4
Karma: 0
Send a private message to this user
Hallo. I have following problems. After installing Winroute Firewall I can't see any of my LAN's PC in My Network Places. I can however ping every LAN machine by name and IP address. Here comes the second problem. When a VPN client connects to the server it's all OK but I can't browse any machine by its name. For example I can write in explorer \\192.168.1.111 and then can browse resources but I can't write \\PC111. Also I can't even ping any LAN machine from the VPN client by name neither I can ping the VPN client from LAN machine by its name (DNS server doesn't work???)

Here's my configuration:

Traffic policies:
S: VPN clients; D: Any; S: Any; A: Allow
S: Firewall; D: Any; S: Ping; A: Allow
S: Dial-in, Internal LAN; D: INet connection; S: Any; A: Allow
S: Dial-in, Internal LAN, Firewall, VPN Clients; D: Dial-in, Internal LAN, Firewall, VPN Clients; S: Any; A: Allow
S: Firewall; D: INet connection; S: Any; A: Allow;

LAN addresses: 192.168.1.x, mask: 255.255.255.0
VPN server address: 192.168.2.0, mask: 255.255.255.0
DNS forwarding: xxx.xxx.xxx.xxx, yyy.yyy.yyy.yyy (my ISP DNS servers), 192.168.1.1 (server IP), 192.168.2.1

I've read other articles about such problems here in the forum but nothing like my case. What else can I do to solve problems described above?

Thank you in advance.

Regards.
  •  
winkelman

Messages: 2119
Karma: 3
Send a private message to this user
I believe you can only browse by name (on other IP subnets then your own), if the DNS server you use gets updates from the DHCP server. This would be the case if the KWF is both your DHCP and DNS server (if you turn on the DNS option to look in the DHCP lease table). Another option is using a specific WINS resolution server. Or something, I do not know too much about Windows networking.
Previous Topic: Basic VPN so close but so far
Next Topic: More external IPs
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Mon Nov 20 13:00:01 CET 2017

Total time taken to generate the page: 0.00401 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.