For sample. I have one subnet with 128 ip number.
(ex. 22.214.171.124 subnet, 255.255.255.128 mask)
I use 126.96.36.199 as an external ip number and for local i use 188.8.131.52 on KWF host. For workstation, we start from 184.108.40.206-220.127.116.11 with 18.104.22.168 as a gateway. I use 22.214.171.124 as a cicsco router ip number (gateway for the external connection on KWF host). In the cisco router, i already set to work with that subnet. I tried and it's working.
Also, on the KWF traffic policy, i add one policy on the beginning of the policies (from the wizard) to disable network address translation (NAT) for workstation. That's mean we are running workstation with public ip number. I tried. It's not working. I mean, when i use chat software from workstation (ex. mirc, yahoo messenger, msn messenger), it doesn't work. Even DHCP server. For trial, i write down the ip number on each workstation.
But as a proxy server, it's ok. I can use internet explorer from workstation.
When i changed from public ip into private ip number on local connection (ex. 192.168.100.0 subnet, 255.255.255.0 mask) on KWF host, it's working properly. We can use all service from workstation.
How can i resolve this, if i want to use one subnet with public ip number on workstation?
Kerio discussion forums are intended for open communication between forum
members and may contain information and material posted by members which may
be useful in learning about Kerio products. The discussion forums are not
intended to provide technical support for any specific product. Any
information implied or expressed in the discussion forums is that of the
posting member. Kerio is in no way responsible for the information posted in
the forums, or its accuracy. Kerio employees may participate in the
discussions, but their postings do not represent an offical position of the
company on any issues raised or discussed. Kerio reserves the right to
monitor and maintain the forums to promote free and accurate exchange of