i have a network setup for testing ADSL 2+ router. i have at the moment 1 CPE which is having problem:
1) The router stabilizes in my network at my laboratory but when the same router goes at a different location in one of our POPs it does not stabilize. This is the majority of
the problems (more than 50%). When another ADSL router of other manufacturer is connected, it works normally.
2 - The CPE does not stabilize in one of the DSLAM ports and when we change to another port in the same DSLAM, with the same configurations, it stabilizes normally and works properly.
3 - while testing in a different location the CPE stabilized during the installation, but one hour later the CPE loses the access, that comes back instants later with instability
(falls in the connection).
4 - When the technician changed the configuration of the WAN of the router, it only stabilizes after a boot.
5 - In some cases the router loses the configurations instead of the configurations has been saved correctly in the router.
6 - The router only stabilize their DSL interface with only one cable of the twisted pair on to the DSLAM. With the twisted pair completed, the router does not stabilize.
- Petr Dobry (Kerio)
And how is it related to Kerio Winroute Firewall ?
Product Development Manager | Kerio
Kerio discussion forums are intended for open communication between forum
members and may contain information and material posted by members which may
be useful in learning about Kerio products. The discussion forums are not
intended to provide technical support for any specific product. Any
information implied or expressed in the discussion forums is that of the
posting member. Kerio is in no way responsible for the information posted in
the forums, or its accuracy. Kerio employees may participate in the
discussions, but their postings do not represent an offical position of the
company on any issues raised or discussed. Kerio reserves the right to
monitor and maintain the forums to promote free and accurate exchange of