Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Kerio VPN with (NetBIOS) Resources of the Local LAN
  •  
ChinDangShun

Messages: 12

Karma: 0
Send a private message to this user
Could you please, anyone experienced, help me to config the LAN-to-LAN in which clients from both LAN can browse the computers list of the other LAN ???

My LAN/WAN configuration as follows:

========== LAN1 ============
- 30PCs (not included KWF Server; IP: 192.168.6.0 / 24)
- 1 PC installed Windows 2000 Server with Kerio Winroute Firewall 6.1.1 with DHCP server, DNS Server and WINS server installed (work well)
- Static IP address: 192.168.6.1 for LAN adapter
- Static IP address: 192.168.7.1 for KerioVPN adapter (no specified Default Gateway; DNS Server IP: 192.168.7.1
- Public IP address: 203.xxx.xxx.xxx for Internet adapter

========== LAN2 ============
- 5 PCs (not included KWF Server; IP: 192.168.8.0 / 24)
- 1 PC installed Windows 2000 Server with Kerio Winroute Firewall 6.1.1 with DHCP server, DNS Server and WINS server installed (work well)
- Static IP address: 192.168.8.1 for LAN adapter
- Static IP address: 192.168.5.1 for KerioVPN adapter
- Public IP address: 58.xxx.xxx.xxx for Internet adapter

I have configed the VPN Server on KWF console to supply VPN LAN-to-LAN successfully and it can work by browsing each other computer under the form of "\\computername.domainname.xxx".

But when each client go to Windows Explorer and browse network resource (or Network Neighborhood or My Network Places), they can not find any resource.

I have some documents show that Microsoft RRAS can solve this problem by suppy WINS resolution to be installed in both side VPN servers.

So, can Kerio Winroute Firewall can do as Microsoft VPN with a Microsoft WINS Server ????
  •  
ChinDangShun

Messages: 12

Karma: 0
Send a private message to this user
Anyone can reply the above question for me, please ???
  •  
marrab

Messages: 21
Karma: 0
Send a private message to this user
Tune up replication between WINS servers in LAN1 and LAN2
  •  
ChinDangShun

Messages: 12

Karma: 0
Send a private message to this user
marrab wrote on Thu, 15 June 2006 13:28

Tune up replication between WINS servers in LAN1 and LAN2


But could you please help me how to config the VPN Servers of KWF so that they "understand" WINS of Windows ? How ?
  •  
winkelman

Messages: 2119
Karma: 3
Send a private message to this user
AFAIK KWF does not have to 'understand' WINS or anything other. It is just a virtual network cable between two servers. After you've properly configured it from an IP and firewall point of view (IP routes, traffic policies, etc.), what you do with it, is beyond KWF. I would guess WINS server replication is configured on... the WINS servers.
Previous Topic: White List
Next Topic: KWF and Bulletproof-FTP-server
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Sat Nov 18 02:08:45 CET 2017

Total time taken to generate the page: 0.00498 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.