Connect. Communicate. Collaborate. Securely.

Home » Kerio User Forums » Kerio Control » Problem with AD authentication
  •  
MagiC

Messages: 1
Karma: 0
Send a private message to this user
Hello! I'am testing KFW v6.2.2 on W2K3 server. I have two w2k3 domains in my lan, and configure AD mapping for these domains in KWF. About two days all works just fine, but after that these messages can be found in debug log and AD authentication not working. After KWF server rebooting all works fine again about two days and problem repeating.

[28/Sep/2006 14:55:54] {pktdrop} packet dropped: 3-way handshake not completed (to LAN, proto:TCP, len:40, ip/port:192.168.65.2:2121 -> 192.168.65.5:389, flags: FIN ACK , seq:1468355881 ack:1684285046, win:64932, tcplen:0)
[28/Sep/2006 14:55:55] {pktdrop} packet dropped: 3-way handshake not completed (to LAN, proto:TCP, len:40, ip/port:192.168.65.2:2132 -> 192.168.65.5:389, flags: FIN ACK , seq:271966405 ack:2109948354, win:65169, tcplen:0)

28/Sep/2006 14:48:13] {pktdrop} packet dropped: 3-way handshake not completed (to LAN, proto:TCP, len:40, ip/port:192.168.3.2:1120 -> 192.168.3.1:389, flags: FIN ACK , seq:3417408678 ack:1981877542, win:64083, tcplen:0)
[28/Sep/2006 14:48:13] {pktdrop} packet dropped: 3-way handshake not completed (to LAN, proto:TCP, len:40, ip/port:192.168.3.2:1121 -> 192.168.3.1:389, flags: FIN ACK , seq:2655589561 ack:1846430722, win:65535, tcplen:0)
[28/Sep/2006 14:48:13] {pktdrop} packet dropped: 3-way handshake not completed (to LAN, proto:TCP, len:40, ip/port:192.168.3.2:1074 -> 192.168.3.1:389, flags: FIN ACK , seq:2743407048 ack:964604304, win:64337, tcplen:0)

192.168.65.2, 192.168.3.2 - is a KWF server ip
192.168.65.5 - is a first domain controller ip
192.168.3.1 - is a second domain controller ip

Connectivity between these servers is ok - servers connected in the same switch.
Previous Topic: Help with winroute configuration on LAN with PPPoE connection
Next Topic: PPTP Protocol Inspector required?
Goto Forum:
  


Disclaimer:
Kerio discussion forums are intended for open communication between forum members and may contain information and material posted by members which may be useful in learning about Kerio products. The discussion forums are not intended to provide technical support for any specific product. Any information implied or expressed in the discussion forums is that of the posting member. Kerio is in no way responsible for the information posted in the forums, or its accuracy. Kerio employees may participate in the discussions, but their postings do not represent an offical position of the company on any issues raised or discussed. Kerio reserves the right to monitor and maintain the forums to promote free and accurate exchange of information.

Current Time: Sat Nov 18 05:44:41 CET 2017

Total time taken to generate the page: 0.00460 seconds
.:: Contact :: Home ::.
Powered by: FUDforum 3.0.4.